Stronger 24/7 - Stronger Everyday
Stronger 24/7 Forum
Maarten private msg quote post Address this user
I got bored today (final exams within 2 weeks, and when I need to study I get creative)
So today I made my first singlet. (Summer's coming!)

Step 1: Take an old shirt, or a cheap one like I did. Get some tape on steroids and tape that shirt to the table/ground like I did.


I have no measurements, it's a matter of trail and error unfortunately.

Step 2: Cut the first sleeve of (don't take a break when cutting it out)



Step 3: Do the same with the other sleeve.



Step 4: This is where it gets tricky! only cut out the FRONT of your collar! At the backside you only cut away the part where your collar is stitched.



Step 5: Wear.

Post 1 IP   flag post
Maarten private msg quote post Address this user
At step 4 it isn't very clear how I cut that out, I just cut along the sides of the tap and made a little curve at the end.
Post 2 IP   flag post
Dragonian private msg quote post Address this user
haha good post man! ive done this before but there never perfect as i dont use tape i just rip that shit apart
Post 3 IP   flag post
skullay private msg quote post Address this user
giving this a shot later today
Post 4 IP   flag post
dwatson private msg quote post Address this user
Send a back picture bro. Reps though!
Post 5 IP   flag post
Christf private msg quote post Address this user
very nice
Post 6 IP   flag post
dwatson private msg quote post Address this user
Checked it out again, gunna have to try it tonight if i have time. Im going to try and make a Y back however. Looks good man.
Post 7 IP   flag post
DETERMINED1 private msg quote post Address this user
Nice
Post 8 IP   flag post
Maarten private msg quote post Address this user
Yeah my back isn't y-shaped unfortunately,
but I'm going to make one later on.

just take the tank, tape it on the table again, but with the back up, and just tape out the line's on how you plan to cut it out. simple!
Post 9 IP   flag post
dwatson private msg quote post Address this user
Quote:
Originally Posted by Maarten
Yeah my back isn't y-shaped unfortunately,
but I'm going to make one later on.

just take the tank, tape it on the table again, but with the back up, and just tape out the line's on how you plan to cut it out. simple!


Yep, will give this a try! I'll post pics when i get it too man. Thanks for the idea!
Post 10 IP   flag post
Maarten private msg quote post Address this user
Quote:
Originally Posted by dwatson
Quote:
Originally Posted by Maarten
Yeah my back isn't y-shaped unfortunately,
but I'm going to make one later on.

just take the tank, tape it on the table again, but with the back up, and just tape out the line's on how you plan to cut it out. simple!


Yep, will give this a try! I'll post pics when i get it too man. Thanks for the idea!

Np!
Looking forward to your pics!
Post 11 IP   flag post
dwatson private msg quote post Address this user
Very curios to where this staircase leads too....


BTW, its so F'in WHITE in your house bro lol



Post 12 IP   flag post
Maarten private msg quote post Address this user
:')
That's the bathroom upstairs, recently painted white, the 'hallway' is light-grey but everything looks more white-ish because of the light coming from the attic.
The attic isn't really being used atm, but it recently got renovated and I think about putting a squat rack over there cuz no-one uses that space
Post 13 IP   flag post
dwatson private msg quote post Address this user
Quote:
Originally Posted by Maarten
:')
That's the bathroom upstairs, recently painted white, the 'hallway' is light-grey but everything looks more white-ish because of the light coming from the attic.
The attic isn't really being used atm, but it recently got renovated and I think about putting a squat rack over there cuz no-one uses that space



Or.. you could make it your official Smush room! - Jersey Shore for those who dont know lol
Post 14 IP   flag post
Maarten private msg quote post Address this user
I wish.
Post 15 IP   flag post
Cupcake private msg quote post Address this user
Quote:
Originally Posted by Maarten
:')
That's the bathroom upstairs, recently painted white, the 'hallway' is light-grey but everything looks more white-ish because of the light coming from the attic.
The attic isn't really being used atm, but it recently got renovated and I think about putting a squat rack over there cuz no-one uses that space


Strong floors must be strong!!
Post 16 IP   flag post
mikew private msg quote post Address this user
This is great!!
Post 17 IP   flag post
Jusu private msg quote post Address this user
I have to try right after I get some old/cheap t-shirt
Post 18 IP   flag post
seansm10 private msg quote post Address this user
i read it a couple times but it doesnt feel like computing, could you elaborate on step 4 a little?
Post 19 IP   flag post
Maarten private msg quote post Address this user
Quote:
Originally Posted by seansm10
i read it a couple times but it doesnt feel like computing, could you elaborate on step 4 a little?


Yeah, the picture isn't that clear.
The part where you can see the neck, you only cut that part out on the front of the shirt (following the white line of the tape). You slightly bend towards the end (so you get some sort of parabolic shape).
Then you only cut out 1 cm of the back of the shirt.

But man, it's so hard to explain this part clearly :')
Post 20 IP   flag post
Swayz87 private msg quote post Address this user
Quote:
Originally Posted by Maarten
I got bored today (final exams within 2 weeks, and when I need to study I get creative)
So today I made my first singlet. (Summer's coming!)

Step 1: Take an old shirt, or a cheap one like I did. Get some tape on steroids and tape that shirt to the table/ground like I did.


I have no measurements, it's a matter of trail and error unfortunately.

Step 2: Cut the first sleeve of (don't take a break when cutting it out)




Step 3: Do the same with the other sleeve.



Step 4: This is where it gets tricky! only cut out the FRONT of your collar! At the backside you only cut away the part where your collar is stitched.



Step 5: Wear.




IN 4 the VID!!!!!


BRB looked at pictures...are you a wizard brah!!!

half that shirt disappeared and I aint got no clue how! ; P

BUT SRS!!! VID MAN! you'll get RAPED SO HARD!
Post 21 IP   flag post
DETERMINED1 private msg quote post Address this user
i tried .... i failed... twice
Post 22 IP   flag post
seansm10 private msg quote post Address this user
will attempt later. and maarten youre arms are massive no homo
Post 23 IP   flag post
Maarten private msg quote post Address this user
Quote:
Originally Posted by Swayz87
Quote:
Originally Posted by Maarten
I got bored today (final exams within 2 weeks, and when I need to study I get creative)
So today I made my first singlet. (Summer's coming!)

Step 1: Take an old shirt, or a cheap one like I did. Get some tape on steroids and tape that shirt to the table/ground like I did.


I have no measurements, it's a matter of trail and error unfortunately.

Step 2: Cut the first sleeve of (don't take a break when cutting it out)




Step 3: Do the same with the other sleeve.



Step 4: This is where it gets tricky! only cut out the FRONT of your collar! At the backside you only cut away the part where your collar is stitched.



Step 5: Wear.




IN 4 the VID!!!!!


BRB looked at pictures...are you a wizard brah!!!

half that shirt disappeared and I aint got no clue how! ; P

BUT SRS!!! VID MAN! you'll get RAPED SO HARD!


I'll do the vid today or tomorrow, will post it here.
Waiting for that rape.
Post 24 IP   flag post
Maarten private msg quote post Address this user
Quote:
Originally Posted by seansm10
will attempt later. and maarten youre arms are massive no homo


My biceps are good, but my tri's are lacking due to never training them in the past.
Post 25 IP   flag post
Maarten private msg quote post Address this user
+ I will add a tutorial how to cut out the backside as well, so you can show off your back!
Post 26 IP   flag post
Maarten private msg quote post Address this user



Made this one today, video will be up tomorrow.
Post 27 IP   flag post
DETERMINED1 private msg quote post Address this user
Quote:
Originally Posted by Maarten
video will be up tomorrow.
Post 28 IP   flag post
Swift private msg quote post Address this user
Bump?
Post 29 IP   flag post
Maarten private msg quote post Address this user
soon.. I'm studying atm. No time.
Post 30 IP   flag post
340617 46 30
destitute